Protective Coating

We supply and apply the following protective coatings:

Nippon EA4 Epoxy

Recommended for non-immersion services.

Nippon EA4 Finish is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required.

Nippon EA4 Finish is also available in non-skid quality.

Highlights of this product include:

  • Excellent adhesion
  • Good resistance to mechanical damage
  • Abrasion resistance

Nippon EA4 Epoxy

Recommended for non-immersion services.

Nippon EA4 Finish is a two-pack amine-adduct cured epoxy finish for use on steel and cement surfaces where chemical, oil and abrasion resistant coating is required.

Nippon EA4 Finish is also available in non-skid quality.

Highlights of this product include:

  • Excellent adhesion
  • Good resistance to mechanical damage
  • Abrasion resistance

Polyurethane Recoatable Finish

Highly durable direct gloss and topcoat finish.

Nippon Polyurethane Recoatable Finish (Gloss) has been developed to provide a highly durable direct gloss and colour retention topcoat finish, incorporating an extensive range of performance characteristics.

Nippon Polyurethane Recoatable Finish (Gloss), applied over such proven priming systems, offers outstanding operational performance including abrasion, chemical and impact resistance and colour or gloss retention.


Micaceous Iron Oxide ( MIO )

Nippon Micaceous Iron Oxide (MIO) is an alkyd-based coating pigmented with micaceous iron oxide.

It is recommended for use as protective coating on steel structures. It may be overcoated with alkyd-based finish or left uncoated.


Aluminium Paint

A durable coating for a lustrous finish.

Nippon Aluminium Paint is a linseed oil/phenolic resin based paint which gives a lustrous finish.

It is a durable protective coating suitable for use on tank exteriors and even in marine conditions.


Acrylic Finish Topcoat ( Gloss )

Nippon Acrylic Finish Topcoat (Gloss) is an acrylic resin based finish with excellent alkaline and weathering resistance.

It can be used for decoration of concrete, plastered walls, asbestos, as well as top coat for water based textured coating, such as Tilelac EMA Base.


Nippon EA9 Finish HB

An economical and high performance coat against corrosion.

Nippon EA9 Finish HB is a two-pack amine-adduct cured epoxy specially developed to achieve long term corrosion protection for many types of surfaces i.e. aluminium, galvanizing, steel and concrete.

This feature combined with its wide range of resistance properties make Nippon EA9 Finish HB a durable, high performance and economical coating for immersion as well as non-immersion services.

Nippon EA9 Finish HB system has been extensively used for long term corrosion protection lining of storage tank for palm oil derivatives, vegetable oil, potable water etc.

Highlights of this product include:

  • Good resistance to abrasion and mechanical damage
  • Excellent adhesion
  • Outstanding resistance to aqueous solutions and a wide range of industrial chemicals

Nippon 8048

Excellent combination of anti corrosion resistance in virtually any environment.

Nippon 8048 is a two-pack epoxy polyamide coating, specifically designed for use on steel surfaces that cannot be abrasive blast cleaned.

Nippon 8048 can be used either as a high build primer or a self-priming high build finish under non-immersion service.

Highlights of product include:

  • Outstanding tolerance to manually prepared surfaces
  • Excellent corrosion resistance through a combination of anti-corrosion pigments and rust penetrants
  • Excellent resistance to penetration by moisture and corrosive ions
  • High tolerance where application over conventional coating system such as aged alkyd system